Swimming pool filtration system

Hello.

I found quite a bit of information about this on YouTube. I watched several videos and it was enough to get me started. They tend to be mostly American.

Thanks andy i jave a look 

A bit of advice, if you are experimenting with it yourself with limited knowledge always make sure the pump is off before you move the 6 position valve.

Better still employ someone with experience of pool cleaning and ask them to train you in both the cleaning process and balancing the chemicals 

I'm a newbie to pools this year but there are only so many variations to remember. And always turn the control valve clockwise and never move it when the pump is on, 

Filter _ sump open, jets on, skimmers on cleaner off

Clean/ vacuum _ sump closed, jets on, cleaner on, skimmers off - pump set to waste

Backwash, pump set to backwash, jets, cleaner and skimmers off, sump open

Rinse, pump set to rinse settings valves set same as backwash

Clean once a week with your vacuum brush

Back flush for at least two minutes at least once a week

Take a water sample to the pool shop and they will advise on chemicals

Rinse after backflush for at least a minute

Hi, Nigel on 677146140 will sort your pool for a very reasonable fee and will give you all the advice you need. 

Steve.

Hi steve this guy sounds the best option for us i need to see how the system works and to see that the chemicals are correct thanks very much i will give him a call 

Try swimuniversity.com American but got all the info needed on chemicals, filtration systems differ I see you have 4 inlet/outlet valves where I have 3 but the chemical balance is the same theory for all non salt water pools

Thank you i will look them up 

I am new to pool maintenance also my neighbour put me onto swim university at first I thought he was joking but it does explain the basics of pool chemistry clearly, good luck!